FESTO type ISO6431 standard Pneumatic Cylinder
ISO6431 / VDMA24562 Standard Pneumatic Air Cylinder (DNC Series)
1.DNC series standard cylinder are producing conform to ISO 15552 ( ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290).
2.Very wide used in the automation field, especial in Europe market.
3.Normally bore size: 32mm, 40mm, 50mm, 63mm, 80mm, 100mm, 125mm.
4.With the same FESTO DNC appearance, available built-in magnet, no protruding proximity sensors thanks to profile slots.
5.With self-lub bearing, the piston rod is lubrication free. And the adjustable air cushion keep the cylinder operating soomthly, safely and quietly.
6.Easier and various mounting via female threads or mounting accessories.
7.Supply cylinder kits, aluminium barrel, piston for customer assemble cylinder locally.
Specification:
DNC Series ISO6431/VDMA24562 standard cylinder |
||||||||
Bore size(mm) |
32 |
40 |
50 |
63 |
80 |
100 |
125 |
|
Action |
Double acting,single/double rod |
|||||||
Fluid |
Filtered compressed air |
|||||||
Proof pressure |
1.5Mpa |
|||||||
Operating pressure range |
0.05~1.0Mpa |
|||||||
Ambient and fluid temperature |
-20~80ºC(No freezing) |
|||||||
Port size |
G1/8 |
G1/4 |
G1/4 |
G3/8 |
G3/8 |
G1/2 |
G1/2 |
|
Piston rod thread |
Basic type |
M10X1.25 |
M12X1.25 |
M16X1.5 |
M20X1.5 |
M27X2.0 |
||
K3 |
M6 |
M8 |
M10 |
M12 |
M16 |
|||
K5 |
M10 |
M12 |
M16 |
M20 |
M27 |
|||
Cushion |
Adjustable air cushion at both ends |
Materials
Cylinder barrel |
Wrought aluminium alloy, smooth-anodised |
Bearing and end cap |
Die-cast aluminium |
Piston rod |
High-alloy steel |
Seals |
Polyurethane, nitrile rubber |